Channel Gates - Series 25

The Fontaine SERIES 25 Channel Gate is the same construction as the SERIES 20 Sluice Gate except that it does not have a top seal. It is made of stainless steel and has very high corrosion and erosion resistance, allowing many years of operation with minimum maintenance. The gate is also lighter and easier to handle and install than those made of cast iron.

The unique sealing system of the SERIES 25, with its UHMWPE side seals that extend up to the top frame, keep leakage in positive seating below 0.05 U.S. gpm per foot of perimeter (0.60 l/min per metre), which is just half the maximum allowed by AWWA standard C513.

SERIES 25 is available with various mounting options and can be installed in any channel.

Link to the documentation
Link to the spec sheet
Seals details_s25.zip
Model 253 - Wall-mounted (CW) with yoke-mounted handwheel operator (V) Rising Stem (RS2) 253_cw_v_rs2.zip
Model 253 - Inside an Existing Channel (EC) with yoke-mounted gear box and crank operator (MNE) Rising stem (RS2) 253_ec_mne_rs2.zip
Model 253 - Frame embedded (FE) with yoke-mounted gear box and crank operator (MNE) Rising stem (RS2) 253_fe_mne_rs2.zip